Apollo 55000-217APO, Series 65A Ionisation Smoke Detector Standard

Apollo 55000-217APO, Series 65A Ionisation Smoke Detector Standard

Manufacturer:Apollo America Inc.
Manufacturer Part#:55000-217APO
Our Part#:55000-217APO
Stock Status: 1 week lead time to ship
Retail Price:$31.52
Your Savings:$0.62(2%)
Your Price:$30.90

Feature:

Apollo

Feature:

55000-217APO

Feature:

Yes

Feature 5

Yes

Feature 7

Product Type:Smoke Detector|System Type:Conventional|Detection Type:Ionization|Input Voltage:24VDC|Connection Type:System|Intended Use:Commercial/Industrial|Battery Backup:No|Interconnect:No

1 week lead time to ship

Features

  • Responds well to fast-burning, flaming fires
  • Designed to operate in a variety of environments

Description

The Series 65 Ionization Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chamber and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.

Technical Data

Detector Part no: 55000-217
Detector Type: Point type smoke detector for fire detection and alarm systems for buildings
Detection Principle: Ionization chamber
Chamber Configuration Twin compensating chambers using one single-sided ionising radiation source
Radioactive Isotope: Americium 241
Activity: 33.3 k Bq, 0.9µCi
Supply wiring: Two wire monitored supply, polarity insensitive
Terminal functions: L1 IN and L2: supply in connections (polarity insensitive)
L1 OUT and L2: supply out connections (polarity insensitive)
?R: remote indicator negative connection
Supply Voltage: 9 to 33V DC
Ripple Voltage: 2V peak to peak maximum at 0.1Hz to 100kHz
Quiescent Current: 20-45µA at 24V
Switch-on Surge Current: 110µA
Alarm voltage: 6 to 33V
Normal Alarm Current: 61mA at 28V
52mA at 24V
18mA at 10V
Alarm indicator: Red, Light Emitting Diode (LED)
Design Alarm Load: 420Ω in series with a 2V drop
Holding Voltage: 6V (min)
Holding Current: 10mA (min)
Minimum Voltage Required to Illuminate Indicator: 12V
Alarm Reset Voltage: 1V
Alarm Reset Time: 1 second
Remote Output Characteristics: Remote is a current sink to the negative line limited to 17mA
Calibration: Factory set to ΔV of 0.8V
Sensitivity: Nominal threshold Y value of 0.7 to EN 54-7: 2000
Temperature Range: Maximum continuous operating temperature: 60°C
Minimum continuous operating temperature: 0°C
Minimum operating temperature: -20°C
(no condensation or icing)
Storage: -30°C to 80°C
Temperature Compensation: Automatic compensation by dual chambers to comply with EN 54-7: 2000 across the operating temperature range
Humidity: 0 to 95% relative humidity
(no condensation)
Atmospheric Pressure: Automatic compensation by dual chambers to maintain sensitivity up to a height of 2000m
Wind Speed: 10m/s maximum
IP rating: 23D in accordance with BS EN 60529
Dimensions: (dia x height) Detector: 100x42mm
Detector in Base: 100x50mm
Weights: Detector: 102g
Detector in Base: 153g
Materials: Detector Housing: White polycarbonate rated V-0 in accordance with UL94
Terminals: Nickel plated stainless steel
The Series 65A Ionization Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chamber and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.

You May Also Like...

Recently Viewed Items