Apollo 55000-317APO, Series 65A Optical Smoke Detector Standard

Apollo 55000-317APO, Series 65A Optical Smoke Detector Standard

Manufacturer:Apollo America Inc.
Manufacturer Part#:55000-317APO
Our Part#:55000-317APO
Stock Status: 1 week lead time to ship
Retail Price:$31.52
Your Savings:$0.62(2%)
Your Price:$30.90

Feature:

Apollo

Feature:

55000-317APO

Feature:

Yes

Feature 5

Yes

Feature 7

Product Type:Smoke Detector|System Type:Conventional|Detection Type:Photoelectric|Input Voltage:24VDC|Connection Type:System|Intended Use:Commercial/Industrial|Battery Backup:No|Interconnect:No

1 week lead time to ship

Features

  • Responds well to slow-burning, smouldering fires
  • Well suited for bedrooms and escape routes
  • Unaffected by wind or atmospheric pressure

Description

The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector but has an indicator LED which is clear in quiescent state but produces a red light in alarm.

Technical Data

Detector Part no: 55000-317
Detector Type: Point type smoke detector for fire detection and alarm systems for buildings
Detection Principle: Photo-electric detection of light scattered in a forward direction by smoke particles
Chamber Configuration Horizontal optical bench housing an infra-red emitter and sensor arranged radially to detect foreward scattered light
Sensor: Silicon PIN photo-diode
Emitter: GaAs Infra-red light emitting diode
Sampling frequency: Once every 3 seconds
Confirmation Frequency: Once every 2 seconds
Number of Consecutive Sensed Alarm Signals Needed To Trigger Detector Alarm: 3
Supply wiring: Two wire monitored supply, polarity insensitive
Terminal functions: L1 IN and L2: supply in connections (polarity insensitive)
L1 OUT and L2: supply out connections (polarity insensitive)
?R: remote indicator negative connection
Supply Voltage: 9 to 33V DC
Ripple Voltage: 2V peak to peak maximum at 0.1Hz to 100kHz
Quiescent Current: 30-50µA at 24V
Alarm voltage: 6 to 28V
Normal Alarm Current: 61mA at 28V
52mA at 24V
18mA at 10V
Alarm indicator: Clear light emitting diode (LED) emitting red light
Design Alarm Load: 420Ω in series with 2V drop
Holding Voltage: 6V (min)
Holding Current: 10mA (min)
Minimum Voltage Required to Illuminate Indicator: 12V
Alarm Reset Voltage: 1V
Alarm Reset Time: 1 second
Remote Output Characteristics: Remote is a current sink to the negative line limited to 17mA
Sensitivity: Nominal alarm threshold of 0.15dB/m obscuration, measured in accordance with EN 54-7: 2000
Temperature Range: ?20°C to +60°C
(no condensation or icing)
Humidity: 0 to 95% relative humidity
(no condensation)
Wind Speed: Insensitive to wind
Atmospheric Pressure: Insensitive to atmospheric pressure
IP rating: 23D in accordance with BS EN 60529
Dimensions: (dia x height) Detector: 100x42mm
Detector in Base: 100x50mm
Weights: Detector: 99g
Detector in Base: 150g
Materials: Detector Housing: White polycarbonate rated V-0 in accordance with UL94
Terminals: Nickel plated stainless steel
The Series 65A Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector but has an indicator LED which is clear in quiescent state but produces a red light in alarm.

You May Also Like...

Recently Viewed Items