Gentex 7139LS, 120VAC Photoelectric Smoke Alarm with Strobe, Temporal 3 Sounder, Line, Battery
Battery backup only available on 7109LS and 7139LS models

Gentex 7139LS, 120VAC Photoelectric Smoke Alarm with Strobe, Temporal 3 Sounder, Line, Battery

Manufacturer:Gentex
Manufacturer Part#:917-0018-002
Our Part#:GN-7139LS
Stock Status: In Stock
Retail Price:$205.00
Your Savings:$81.59(40%)
Your Price:$123.41

Feature:

Gentex

Feature:

917-0018-002

Feature:

Yes

Feature:

700217014554

Feature 5

Yes

Feature 7

Product Type:Smoke Detector|Input Voltage:120VAC|Detection Type:Photoelectric|Connection Type:Hardwired|Intended Use:Residential,Commercial|Battery Backup:Yes|Interconnect:No

Features

  • Temporal 3 Evacuation Sounding Device (713/7139)
  • 9 Foot linecord
  • 177 candela rating (UL 1971)
  • Solid-state, non-latching 90 dB Horn
  • Patented, three-position test switch
  • 9 VDC battery backup (7109CS & 7109LS) w/audible low battery chirp
  • Nominal 2.5% sensitivity
  • 5:1 signal-to-noise ratio
  • Pulsing LED sensing chamber
  • Fully insect screened
  • Solid State LED condition indicator
  • Mounting hardware adapts to standard junction boxes
  • On-site maintenance washing program

Important Notes

  • It is recommended that 710/713/7109/7139 Series smoke alarm be tested weekly.

Description

Product Listings:
-UL 217 and UL 1971 Listed
-CSFM: 7257-0569:104 (710/713CS/LS)
7257-0569:118 (7109/7139CS/LS)
BS+A/MEA: 285-91-E
BFP (City of Chicago)
MSFM Listing #1929

Product Compliance:
-NFPA 72
-Americans with Disabilities Act (ADA)

The 710/713CS/LS and 7109/7139CS/LS photoelectric single/multiple station smoke alarms are designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The series features a 90dBA solid state piezo signal and a 177 Candela strobe with "FIRE" lettering. The strobe is listed per UL 1971.

The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires, utilizing a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber.

Every 4 to 5 seconds the pulsing LED emits an infrared beam that by passes the photodiode under normal conditions. However, when smoke enters the sensing chamber, the infrared beam is deflected onto the sensor by the smoke particles. The LED pulse rate increases to 8 times the normal rate, and after the photodiode confirms that smoke is present for 2 consecutive pulses, it will produce the signal necessary to trip an alarm.

Upon activation, the alarm will emit a 90dBA local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 candela 60 times per minute. After the smoke has cleared from the detector, the unit will revert to the normal stand-by condition.

Electrical Specifications

Operating Voltage 120 VAC, 60Hz
Operating Current 0.400 amps (Peak)
Operating Ambient Temperature Range 40F to 100F
Alarm Horn Rating 90 Decibels at 10 ft
Nominal Sensitivity 2.5% Obscuration
Size 5.5" Square x 4.75" Overall Depth
Secondary Power Source Alkaline 9VDC battery (included)
The Gentex 7139LS is a single-station 120VAC photoelectric smoke alarm/detector with visual signa, designed to provide early warning of smoke with photoelectric sensing.The 7139LS is equipped with a 9 foot line cord that lets you instantly equip any room with a 177-candela visual and 90-decible audible signal, all in one device. It includes 9V battery backup (smoke only).

You May Also Like...

Recently Viewed Items