Gentex GCS24CR, 24VDC Strobe, Selectable Candela, Ceiling-Mount, Red

Gentex GCS24CR, 24VDC Strobe, Selectable Candela, Ceiling-Mount, Red

Manufacturer:Gentex
Manufacturer Part#:904-1213-002
Our Part#:GN-GCS24CR
Stock Status: In Stock
Retail Price:$64.00
Your Savings:$31.74(50%)
Your Price:$32.26

Feature:

Gentex

Feature:

904-1213-002

Feature:

Yes

Feature:

700217018453

Feature 5

Yes

Feature 7

Candela Type:Selectable|Candela Rating:15/30/75/95/115/150|Input Voltage:24VDC|Color:Red|Mounting Type:Wall-Mount

Features

  • Nominal voltage 24VDC
  • Tamperproof field selectable candela options of 15, 30, 75, 95,115 & 150
  • Super-Slide® Bracket - Ease of Supervision Testing
  • Checkmate® - Instant Voltage Verification
  • Unit Dimensions: 6" (15.24 cm) x 2.6" (6.604 cm)
  • Synchronize strobe and/or horn with Gentex AVSM Control Module
  • Prewire entire system, install mounting bracket, then install signals
  • Documented lower installation and operating costs
  • Input Terminals 12 to 18 AWG
  • Switch Selection for High or Low dBA
  • Switch Selection for 2400Hz or Mechanical Tone
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof re-entrant grill
  • Surface mount with the GCSB (Gentex Ceiling Surface Mount Box)
  • Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
  • Faceplate available in red or off-white

Description

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current consumption.

The GCS/GCCoffers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone. All tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a very minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-Slide® feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing.

The Commander4 also features the patented Checkmate® - Instant Voltage Verification feature which allows the installer to check the voltage drop draw without removing the signal.

The GC Series appliances are ANSI/UL 464 and ANSI/UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase.

Available Models

GCS Series 24 Volt Ceiling Mount Selectable Strobe
Model NumberPart NumberNominal VoltageStrobe CandelaFaceplate
GCS24CR904-1213-00224 VDC15, 30, 75, 95, 115, 150Red
GCS24CW904-1215-00224 VDC15, 30, 75, 95, 115, 150Off-white

GCC Series 24 Volt Ceiling Mount Selectable Horn/Strobe
Model NumberPart NumberNominal VoltageStrobe CandelaReverberant dBA @ 10ft Per ANSI/UL 464In Anechoic Room dBA @ 10ft.Faceplate
GCC24CR904-1209-00224 VDC15, 30, 75, 95, 115, 15081-8690Red
GCC24CW904-1211-00224 VDC15, 30, 75, 95, 115, 15081-8690Off-white
The Gentex GCS24CR is a red, wall-mount selectable-candela 24VDC strobe.

You May Also Like...

Recently Viewed Items