ITAsurge 120BCP20M, Hardwire 120-Volts AC In-Line Series Single-Phase 3-Wire (15-20 Amp)

ITAsurge 120BCP20M, Hardwire 120-Volts AC In-Line Series Single-Phase 3-Wire (15-20 Amp)

Manufacturer:ITAsurge, Inc.
Manufacturer Part#:120BCP20M
Our Part#:IT-120BCP20M
Stock Status: In Stock
Retail Price:$125.00
Your Savings:$31.25(25%)
Your Price:$93.75

Feature:

ITA, Inc.

Feature:

120BCP20M

Feature:

No

Feature 5

Yes

If your power side of the system requires a hardwire connection, this 120 Volt AC 3-Wire Single Phase (15-20 Amp) device should be installed as close as possible to the equipment being protected. This is an in-line series (AC) surge suppressor and is designed to stop surges from getting to the PLC - (Mother Board/Computer Board). The 120HWCP20M has a maximum current draw of 15-20 amps and provides both common and normal three-phase noise filtration. UL 1449 listed and rated 400V peak for L-N, L-G, N-G.

Specifications - Operating

MaximumOperating Voltage120V AC
TypicalLeakage CurrentNone
OperationTemperature -40 to + 85°C
ConnectionHardwired
LinesProtected L/N, L/G, N/G
Installation Configuration In-Line Series

Specifications - Electrical

Maximum Surge Current (8x20µs)6,000 Amps Total
Maximum Surge Voltage (1.2x50µ) 3,000 Volts
Clamping Voltage130 Volts RMS
Clamping Response Time <5 nanoseconds
Maximum Line Voltage15-20 Amps @ 120V AC 45/60 Hz
VoltageVoltage Sensitive
Operation IndicatorYes - LED
Power Dissipation (8x20µs)750 Joules or (20,000,000 VA)
UL Recognized ComponentTVSS Device UL File E121637
Failure ModeFails Safe (Open)
DimensionsDepth: 1.5"; Width: 3"; Length: 5"; Tabs: .5"
WeightApproximately 1 lb.
ITA surge suppressors have a Lifetime Product Warranty. Please see warranty statement for complete product warranty information.
In-line series (AC) surge suppressor and is designed to stop surges from getting to the PLC – (Mother Board/Computer Board). The 120BCP20M has a maximum current draw of 15-20 amps and provides both common and normal three-phase noise filtration. Meets UL listed 1449 2nd Edition requirements and is rated 400V peak (Actual 336 volt peak) for L-N, L-G, N-G.

You May Also Like...

Recently Viewed Items