Macurco HS-1, Portable Hydrogen Sulfide (H2S) Monitor

Macurco HS-1, Portable Hydrogen Sulfide (H2S) Monitor

Manufacturer:Macurco
Manufacturer Part#:HS-1
Our Part#:MA-HS1
Stock Status: In Stock
Retail Price:$124.99
Your Savings:$17.86(14%)
Your Price:$107.13

Feature:

Macurco

Feature:

HS-1

Feature 7

Product Type:Detector|Connection Type:Battery|Detection Type:Hydrogen Sulfide|Battery Backup:No|Interconnect:No|Typical Use:Commercial,Commercial/Industrial,Residential|Input Voltage:3V

Features

  • Permanently mounted, non-rechargeable 3.6- volt Lithium battery
  • Help protect against potentially hazardous levels of Hydrogen Sulfide (H2S)
  • Reliable, 2-year performance at an affordable price
  • Ingress Protection Rating: IP54
  • 0-200 ppm (H2S)

Description

The Macurco™ Single-Gas Monitor Series is designed to continuously monitor the ambient environment and notify the user if the level of the target gas reaches the alarm set point for the monitor. The device is designed to operate for two years and then be disposed of according to local regulations. The Macurco Single-Gas Monitor is available in two other versions: CM-1 and OX-1, to monitor either Carbon Monoxide (CO) or Oxygen (O2).

The components of the Macurco Single-Gas Monitor are assembled in an ABS/PC plastic housing. Located on the front face of the unit is an ON/MENU button, the display (LCD), sensor inlet, audio alarm opening, visual alarm LED. On the back of the instrument is an alligator pocket/belt clip and a label containing the intrinsic safety information and serial number.

An internal microprocessor controls the indication and alarm functions in response to the signals received from an electrochemical sensor permanently mounted inside the unit. When turned on, it continuously monitors the ambient air that enters the sensor through the sensor inlet opening by the process of passive diffusion. If the level of the target gas detected by the sensor reaches a preset alarm point, the unit will alarm (see the specifications section).

Specifications

Power Permanently mounted, non-rechargeable 3.6- volt Lithium battery
Operating Life 2 years from activation (maximum 36.5 alarm hours – 3 minutes/day)
Range 0-200 ppm (H2S)
Alarm Settings 10ppm (low) 15ppm (high)
Alarm Readings Low, High Alarms, Low Battery, Over Range
Alarm Indicators Visual Flashing LCD display and Red LED, Audio: 85 dBA @ 1 foot (30.5 cm) buzzer
Tactile Internal vibrator
Sensor Electrochemical
Sensor Replacement Not replaceable
Test Function Self-test on circuitry, battery and alarms.
Readout Direct read LCD
Keypad One button operation
Reading Resolution 5 ppm – Hydrogen Sulfide (Reading start at 10 ppm or greater)
Ingress Protection Rating IP54
Radio Frequency Protection <10% deviation of alarm level when subjected to 450MHz, 5 Watt Radio @ 2ft (61cm)
Intrinsic Safety CSA (US) - Class I, Div. I, Group A, B, C, D, T4A
Operating Temperature -4 to 122°F (-20°C to 50°C)
Operating Humidity 15 – 90% (non-condensing)
Size 3.2 x 2.0 x 1.2 in. (8.1 x 5.1 x 3.1 cm)
Weight 4.1 oz. (115 g)
The Macurco Portable Single-Gas Monitor Series is designed to continuously monitor the ambient environment and notify the user if the level of Hydrogen Sulfide (H2S) reaches the alarm set point for the monitor. The device is designed to operate for two years and then be disposed of according to local regulations.

You May Also Like...

Recently Viewed Items