Potter Electric RMS-6T-EXP-WP-LP, Explosion-Proof and Weatherproof Dual Action Pull Station, DPDT

Potter Electric RMS-6T-EXP-WP-LP, Explosion-Proof and Weatherproof Dual Action Pull Station, DPDT

Manufacturer:Potter Electric
Manufacturer Part#:1000405
Our Part#:RMS-6T-EXP-WP-LP
Stock Status: In Stock
Retail Price:$498.50
Your Savings:$174.80(35%)
Your Price:$323.70

Feature:

Potter Electric

Feature:

RMS-6T-EXP-WP-LP

Feature:

Yes

Feature 5

Yes

Features

  • UL and cUL Listed, FM Approved, Marine and NEMA 4X Rated, CSFM Listed, MEA Approved, ADA Compliant
  • Dual Action
  • Double pole double throw switch (DPDT)
  • High-gloss red enamel finish
  • Screw terminal connections

Description

The RMS-6T-EXP-WP is a high-quality, die-cast metal, explosion-proof manual fire alarm pull station available in either single or dual action configurations. The RMS-6T-EXP-WP is approved for NEMA-4X applications and is UL Listed and Factory Mutual Approved for use in Class I, groups B, C, and D; Class II, groups E, F, and g; and Class III hazardous environments. The RMS-6T-EXP-WP has a DPDT switch with terminal strip connections.

Operation

The RMS-6T-EXP-WP-LP dual-action station Lift and Pull offers added security against unwanted activation without complicating the overall pull station operation. Then, simply by pulling the pull handle on the front of the station as far down as it will go, at which point the handle locks into place, and is easily visible from up to 50 feet. The activated station is reset by opening the station with a key, placing the handle in the normal, upright position, and re-locking the station.

Specifications

Switch Rating1A @ 30VDC
10A @ 125/250 VAC
Contact TypeDPDT
Terminal Size12 to 22 AWG
Temperature-55°C to +150°C
Humidity90% relative humidity at 100°F
Explosion Hazard ClassificationsClass I Groups B, C and D
Class II Groups E, F and G
Class III
Weatherproof ClassificationNEMA Type 4X
Conduit Fittings2
Conduit Fitting Size3/4" - 14 NPT
Color-Face Plate - Red with raised white letters
-Push/Pull Handle - White with raised red letters
The Potter Electric RMS-6T-EXP-WP is an explosion-proof, weatherproof dual-action die-cast metal pull station with DPDT contacts rated at 1A@30VDC and 1A@125/250VAC. The RMS-6T-EXP-WP-LP is approved for NEMA-4X applications and is UL Listed and FM Approved for use in Class I (Groups B, C and D), Class II (Groups E, F and G), and Class III hazardous environments.
Accessories designed for use with this product - To add any of these accessories to your order, simply fill in the quantity you want and click the large "Add to Cart" button above

You May Also Like...

Recently Viewed Items