- E120V-GT Hybrid Surge Protection Device
- E-Series Fire Lockout Kit (Circuit Breaker Lockout Tab, HEX Key, Panel Stickers)
- UL 1449 3rd Edition Type 2 & 3 2X to open circuit breaker @5000A
- Includes lockout & labels per NFPA 72 2013 10.6.5.2
- Surface or conduit mounting
- Diagnostic indicator light
- Self restoring
- 3-wire device (18" length)
in One Device
|The number one cause of destruction, degradation and downtime of critical electrical equipment is from power surges and lightning strikes. The E120V-GT is a UL-Listed device that maintains system integrity by not only absorbing a voltage spike from external sources, but it also clamps long enough to trip the branch circuit breaker and remains functional to protect against additional surges. It is unlike any other product on the market today. |
Safety and performance is what Eclips is all about. While there are many varying criteria to be considered for surge protective devices (SPD), if the design engineer neglects the importance there can be serious implications for the client and equipment.
Every piece of electrical equipment is designed to operate at a specified nominal voltage. Typically equipment is designed to handle minor variations. However external sources such as lightning, motors, and short circuits cause wild and damaging variations.
Critical systems wired to your electrical service, such as Fire Alarm Control Panels (FACP), Mass Notification Systems (MNS), audio amplifiers, fire pump motors, HVAC pumps, units, fans and dampers, power boosters and many more, must require appropriate levels surge protection. The E120 series is an ideal choice for your 120V AC applications. because it has the robustness not only to absorb a spike, but to clamp long enough to trip the branch circuit breaker and still be functional for additional surges.
The number one cause of destruction, degradation and downtime of critical electrical equipment is from power surges and lightning strikes.
The E120V-GT device is an ideal solution to protect equipment. UL listed it maintains system integrity and protects against transients introduced into / onto electrical lines via poor atmospheric and utility conditions as well as internally generated inductive loads and transient TVSS. It reduces system downtime associated with power surges and lightning strikes. Prevents destruction and degradation of electrical components in the system. Fix your nuisance and non-billable service calls as a result of transients and poor power quality and show your customer you care about system integrity.
|Service Voltage ||120V AC Single-Phase |
|Circuits Protected ||L-N L-G N-G |
|Connection Type ||Hardwired |
|Installation Configuration ||Parallel |
|Short Circuit Current Rating (SCCR) ||5KA |
|Maximum Surge Current (8x20μs) ||25,000 Amps |
|Enclosure Material ||UL94 QMFZ2/8 (green) |
|Energy Dissipation Joules |
VPR=700(L-N) 700 (L-G) 600 (N-G)
|500 Joules |
|Capacitance ||< 2,000 pf |
|Clamping Response Time ||< 5 nanoseconds |
|Current ||Non-load bearing |
|Max Operating Voltage (MCOV) ||140V AC, 50/60 Hz |
|Clamping Voltage ||230V RMS |
|Design ||Thermally Fused Hybrid |
|Operation Indicators ||LED |
|Survivability ||UL rated X2 @ 5000A to open Series external circuit breaker |
|UL Listing ||1449 Third Edition - VZCA |
|File Number ||E319370 Vol. 1 Sec. 1 |
|Weight ||5.2oz |
|Dimensions ||2.75" x 1.55" x 4" |
|Operating Temperature ||-40 to +85°C (-40 to 185°F) |
Everything you need to know about the Elock-FA Circuit Lockout Kit