The OSYSU is used to monitor the open position of an OS&Y(outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2" to12" (50mm to 300mm). They will mount on some valves as small as 1/2" (12,5mm).
The cover is held in place by two tamper resistant screws that require a special tool to remove. The tool is furnished with eachdevice and should be left with the building owner or responsible party. Replacement or additional cover screws and hex keys are available.
Optional Cover Tamper Switch
A field installable cover tamper switch is available as an option which may be used to indicate removal of the cover.
The OSYSU and its associated protective monitoring system should be inspected and tested in accordance with applicable NFPA codes and standards and/or the authority having jurisdiction (manufacturer recommends quarterly or more frequently).