AL125ULP is a Two (2) Output Switching Power Supply/Charger that converts a 24VAC @ 40VA input, into two (2) individually PTC-protected 12VDC or 24VDC outputs.
24VAC, 40VA from UL Listed, Class 2 transformer.
Access control trigger input.
12VDC @ 1A or 24VDC @ 0.5A selectable outputs.
Two (2) Class 2 Rated power limited outputs.
Fail-Safe/Fail-Secure lock output (switched).
Auxiliary power output (unswitched).
PTC-protected outputs, rated @ 2.5A.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel-type batteries.
Automatic switch over to stand-by battery when AC fails.
Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
Unit Status: Normal / No Output / Loss of AC / Triggered.
Operating 0° C to 49° C (32° F to 120° F).
Storage - 20° C to 70ºC ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
12VDC: 6 BTU/Hr.
24VDC: 6 or 12 BTU/Hr.
System AC input VA requirement: 55.2VA.
Includes power supply, plug-in transformer, enclosure and battery leads.
Wall mount enclosure for indoor use.
Accommodates up to two (2) 12VDC/4AH Batteries.
Dimensions 7.5"W x 8.5"H x 3.5"D (191 mm W x 216 mm H x 89 mm D).
1/2" and 3/4" combination knockouts.
Product Weight: 6.3 Lbs. (2.86 kg).