template image(0) Item / $0
8:00 AM - 5:00 PM EST (Monday-Friday) |Hi Guest, Login! |
Altronix ACM8CB Access Power Controller, 8 PTC Class 2 Relay Outputs, FAI, Board
Altronix ACM8CB Access Power Controller, 8 PTC Class 2 Relay Outputs, FAI, Board

Altronix ACM8CB Access Power Controller, 8 PTC Class 2 Relay Outputs, FAI, Board

Manufacturer:Altronix
Manufacturer Part#:ACM8CB
Our Part#:AX-ACM8CB
Stock Status: Altronix
Retail Price:$61.03
Your Savings:$6.51(11%)
Your Price:$54.52

Feature:

Altronix

Feature:

AX-ACM8CB

Feature:

Yes
Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock/accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
Fire Alarm disconnect input options:
a) Normally open (NO) or normally closed (NC) dry contact input.
b) Polarity reversal input from FACP signaling circuit.
FACP output relay (form "C" contact rated @ 1A 28VDC not evaluated by UL).
Removable terminal blocks facilitate ease of installation.
Visual Indicators
Red LEDs indicate outputs are triggered (relays energized).
Green LED indicates FACP disconnect is triggered.
Temperature
Operating: 0° C to 49° C (32° F to 120° F).
Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.): 4 BTU/Hr.

Recently Viewed Items