AL1012ULXPD4CB is a multi-output power supply/charger that converts a 115VAC, 60Hz input into four (4) 12VDC Class 2 Rated power limited outputs.
Input 115VAC, 60Hz, 1.9A.
Input fuse rated @ 5A/250V.
10A continuous supply current.
Four (4) Class 2 Rated PTC protected power limited outputs (auto-resettable).
Outputs are rated @ 2.5A.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
AC fail supervision (form "C" contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form "C" contacts).
Battery presence supervision (form "C" contacts).
AC input and DC output LED indicators.
Operating 0 to 49° C (32 to 120° F ).
Storage - 20 to 70° C ( - 4 to 158° F).
Relative Humidity 85% +/- 5%
BTU/Hr. (approx.): 61 BTU/Hr.
System AC input VA requirement: 299VA.