Power Supply Charger, 4 PTC Class 2 Outputs, 12/24VDC @ 4A, 115VAC, Red BC300 Enclosure
AL400ULPD4CBR is a multi-output power supply/charger that converts a 115VAC/60Hz input into four (4) Class 2 Rated 12VDC or 24VDC power limited outputs.
Input 115VAC, 60Hz, 3.5A.
Input fuse rated @ 3.5A/250V.
12VDC or 24VDC selectable output.
12VDC @ 4A or 24VDC @ 3A supply current.
Four (4) Class 2 Rated PTC protected powerlimited outputs (auto-resettable).
Outputs are rated @ 2.5A.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
AC fail supervision (form "C" contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form "C" contacts).
Battery presence supervision (form "C" contacts).
AC input and DC output LED indicators.
Operating 0° C to 49° C (32° F to 120° F).
Storage - 20° C to 70°C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
12VDC: 25 BTU/Hr.
24VDC: 37 BTU/Hr.
System AC input VA requirement: 402.5VA.