template image(0) Item / $0
(800) 837-8175 | 8:00 AM – 5:00 PM EST (Monday-Friday) |Hi Guest, Login! |
Altronix T1RAL13F8P8  Access and Power Integration Kit - Trove1AL1R with eFlow6NB, eFlow4NB, ACM8, PD8UL
Altronix T1RAL13F8P8 Access and Power Integration Kit - Trove1AL1R with eFlow6NB, eFlow4NB, ACM8, PD8UL

Altronix T1RAL13F8P8 Access and Power Integration Kit - Trove1AL1R with eFlow6NB, eFlow4NB, ACM8, PD8UL

review
0
[rating]/50
Manufacturer:Altronix
Manufacturer Part#:T1RAL13F8P8
Our Part#:AX-T1RAL13F8P8
Stock Status: Altronix
Retail Price:$904.57
Your Savings:$96.49(11%)
Your Price:$808.08

Feature:

Altronix

Feature:

AX-T1RAL13F8P8

Feature:

Yes

Feature 5

No
Altronix Access and Power Integration Kit - Trove1AL1R with eFlow6NB, eFlow4NB, ACM8, PD8UL

Altronix T1RAL13F8P8 Trove Rack kit is pre-assembled and consists of Trove1AL1R enclosure/backplane with factory-installed Altronix power supply/chargers and sub-assemblies.

Input
Voltage: 120VAC, 60Hz, 3.5A max.
Fusing: 5A / 250V.
Outputs
Voltage: Factory set: 24VDC.
Current: 6A continuous.
Maximum Supply Current for Main and Aux. Outputs on eFlow6NB Power Supply board, ACM8 Access Power Controller outputs is 5.6A.
Auxiliary: Class 2 power-limited @ 1A (unswitched).
Other: Overvoltage protection. Filtered and regulated.
eFlow4NB Power Supply/Charger
Input
Voltage: 120VAC, 60Hz, 3.5A max.
Main Fuse: 5A / 250V.
Outputs
Voltage: Factory set: 12VDC.
Current: 4A continuous.
Maximum Supply Current for Main and Aux. Outputs on eFlow6NB Power Supply board, ACM8 Access Power Controller outputs is 5.6A.
Auxiliary: Class 2 power-limited @ 1A (unswitched).
Other: Overvoltage protection. Filtered and regulated.
Both Power Supplies
Battery Backup
Type: Sealed lead acid or gel type.
Fuse Rating: 10A @ 32VDC.
Failover: Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised: Latching or non-latching.
EOL: 10K Resistor.
Supervision
AC Failure: Form “C” contacts.
Battery: Form “C” contacts.
Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
Indicators (LED)
Input: 120VAC is present.
DC Output: Powered.
Battery: Discharged or not connected.
ACM8 Access Power Controller
Input
Voltage: 24VDC from eFlow6NB.
Input Fuse: 10A / 32V.
Outputs
Voltage: 24VDC.
Eight (8) independently controlled 2.5A outputs:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
b) Eight (8) dry form “C” 5A rated relay outputs.
c) Any combination of the above.
Eight (8) auxiliary power outputs (unswitched).
Outputs Ratings
Fuses: 3A/32VDC.
Indicators (LED)
Red LEDs: Outputs are triggered (relays energized).
Green LED: FACP disconnect is triggered.
PD8UL Power Distribution Module
Input
Voltage: 12VDC from eFlow4NB.
Outputs
Class 2 power-limited auto-resettable outputs.
Voltage: 12VDC.
PTCs: 2.5A.
Indicators (LED)
Green LED: DC Output.
Environmental
Temperature
Operating: 0° C to 49° C (32° F to 120° F).
Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
115 BTU/Hr.
Altronix T1RAL13F8P8 Access and Power Integration Kit - Trove1AL1R with eFlow6NB, eFlow4NB, ACM8, PD8UL

Recently Viewed Items