Special Order - May Require 5-7 Business Days to Ship
(see our Special Orders policy)
135° Fixed & Rate of Rise
Microprocessor controlled -Features Fixed Rate and Rate of Rise temperature sensing - allows unit to alarm prior to reaching the fixed temperature setting of 135F.
IR Remote Control
Can test or silence the alarm with most household remote controls.
Latching Alarm Indication
Microprocessor controlled - Automatically identifiesinitiating alarm, even after alarm condition has subsided.
Two Silence Features
Can silence the low battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm.
Interconnectable to BRK Smoke Alarms
The BRK Electronics Cat. No. HD6135FB is a wire-in, 120 VAC 60Hz single and/or multiple station heat alarm designed to supplement smoke alarms in residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and othermulti-family dwellings as defined in standard NFPA 101. Model HD6135FB complies with UL539, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC heat alarms are required. This heat alarm is not a smoke alarm nor has it been designated a life safety device.
BRK Electronics HD6135FB is designed to give reliable early warning of heat from fire. It is recommended for garages, crawl spaces, bathrooms, kitchens, laundry rooms or other applications not suitable for smoke alarm installations. It features exclusive IR remote control test/silence that can be activated by most household remote controls. The unit contains a thermistor that senses heat and will alarm when either the temperature reaches 135°F or when a rate of rise of 15°F/minute is sensed by the microprocessor. This feature enables a more rapid response to a potential fire. The unit has an 85dB horn, a 9V battery backup power supply, an easy access side-load battery drawer, two silence features: nuisance alarms and low battery silence and is interconnectable up to 18 devices. The unit features “Latching Alarm Indication”. When interconnected in series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or “latch” the information and begin to flash once every 5 seconds. The red LED indicators remain off on all other interconnected units. The unit mounts to any standard junction box up to 4” size. Keyhole slots in the mounting bracket eliminate the need to remove the junction box screws for installation. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit.
Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective.
See the Cut Sheet for Full Electrical Specifications