Low-Level Remote Test Station
Used with 50RU/100RU. Single gang stainless steel plate. 24 VDC plus dat pair for wiring from the detector head.
By a simple key operation, the Remote Test Station is able to test the alarm function of the 50RU or 100RU Reflective Beam Smoke Detectors at ground level. Initiating the process will start the green LED periodically flashing, indicating that the50RU or 100RU Reflective Beam test is “Live”, and the 2 wire“Data Link” cable has been correctly installed. The green LED will continue to flash during the entire time that the key is in the “Test” position. While the green LED is flashing, the detector will automatically begin a test sequence that will result in the 50RU or 100RU Reflective Beam“electronically” simulating an “Alarm” condition. When this condition is reached, the “Alarm” contact on the detector will be toggled, which will be indicated by the Red LED is illuminated on the 50RU or 100RU detector. This will in turn illuminate the Red LED on the LLC Remote Test Sand also create an“Alarm” on the main Fire Panel. Should the LLC Remote Test Station remain in“Test” mode for longer than 20 seconds, the Reflective Beam Detector will automatically revert back to normal operating mode. The Red "Alarm” LED on the LLC will remain illuminated until the Key has been turned to the“Run” position.
- Compatible with either Fireray50RU or 100RU
- Reflective Beam Smoke Detectors
- Mounts to a standard single gang electrical box
- Stainless steel wall plate
- 7” pigtail leads
- Includes Data Link cable assembly
- A-126 key lock
- 3 year warranty