1 week lead time to ship
Description
The Air Purge kit is intended to be mounted in front of the 2 Hole Mounting Flange viewing window to prevent obscuration by particles. Air is channeled from the air inlet at the side of the adapter and exits around the central viewing hole.
Weight
0.71 lbs (0.32 kg)
Installation
• The purge air adapter should be connected to an external air supply via the female1/4” BSP non-return valve
• The air should be oil-free and dry with a pressure range from 7psi (0.5Bar) to 50psi (3.5Bar)
• If the air is not required continuously to keep the viewing window clean then a pulse of air can be supplied at regular intervals
• CAUTION: This product is not suitable for use in ATEX zone 0 - For use in ATEX zone 1/21 or 2/222, air must be clean and the system blown through before placing in a hazardous environment
Mounting Holes Required Dimensions (inches)
