- 120V AC
- Sealed-In 10-Year Lithium Battery Backup
- 2-LED Display
- Test/Hush® button
- 360° Mounting Plate with Tamper Resistance
- Alarm Memory Indicator
- Ionization Sensing Technology
The Kidde i12010S includes a battery backup which automatically activates when the alarm is attached to the mounting bracket. The large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
The 10-year sealed battery substitutes any need for routine 9V replacement. The large centrally located Test/Hush® alarm control button silences nuisance alarms for approximately 9 minutes. A dust cover protects the sensor from contaminates during construction, reducing nuisance alarms.
A red LED indicates alarm mode, and a green LED indicates when AC power is present. Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user guide for complete instructions. The end of Life Hush feature allows user to temporarily silence end of life chirp 3 days at a time for a maximum of 30 day life extension.
|Power Source ||120VAC (60 Hz, 45mA Max) |
|Sensor ||Ionization |
|Audio Alarm ||85dB at 10ft |
|Temperature Range ||40°F (4.4°C) to 100°F (37.8°C) |
|Humidity Range ||Up to 95% relative humidity (RH), non-condensing |
|Size ||5.5 inch in diameter x 1.75 inch depth |
|Weight ||.45lbs |
|Interconnects ||Up to 24 Kidde devices |
|Warranty ||10 year limited |