template image(0) Item / $0
8:00 AM - 4:00 PM EST (Monday-Friday) |Hi Guest, Login! |
Air Products & Controls RT-3000-P, NEMA 4X Duct Smoke Detector, Photoelectric
Air Products & Controls RT-3000-P, NEMA 4X Duct Smoke Detector, Photoelectric

Air Products & Controls RT-3000-P, NEMA 4X Duct Smoke Detector, Photoelectric

Manufacturer:Air Products & Controls
Manufacturer Part#:RT-3000-P
Our Part#:RT-3000-P
Stock Status: In Stock
Retail Price:$332.43
Your Savings:$99.73(30%)
Your Price:$232.70


Air Products & Controls





Feature 5


Feature 7

Product Type:Duct Detector|Input Voltage:24VDC,120VAC,Other|Detection Type:Photoelectric|Connection Type:Hardwired,System|Intended Use:Commercial/Industrial|Interconnect:No

Call for availability


  • UL Listed, CSFM Listed, MEA Accepted (pending)
  • 180° visibility for all visual indicators with cover in place
  • Operating voltages: 230VAC, 115VAC, 24VAC, 24VDC
  • Patented cover tether retains the one-piece cover at unit
  • Flashing LED on detector head indicates normal operation, can be viewed with cover on
  • Ionization and Photoelectric versions available
  • Interconnect up to 30 units for common functions
  • Works with the complete range of APC remote accessories to include all legacy duct detectors and sample tubes from APC.
  • Compatible with building automation and fire alarm systems
  • FASTTUBE Equipped

What's Included

  • 7" exhaust tube
  • FAST Tube sectional sampling tube starter, end cap
  • mounting template
  • test magnet
  • mounting hardware


The RT-3000 is an installer/servicer friendly product, and significantly reduces the total cost of ownership versus other comparable products. Attention to detail has yielded a host of "No-Tools Required" features, as well as a multi-application performance level as yet unmatched in the industry.

The weather-tight NEMA 4X rated corrosion resistant enclosure coupled with extended temperature listings allow installation in the widest possible range of indoor/outdoor environments. The RT-3000 can be installed in both horizontal or vertical configurations to match installation preferences.

A simple flip of the cover latch releases or secures the NEMA 4X enclosure which houses:

  • a next-generation control board with color-coded, trade-dedicated output terminals
  • twist-in photo or ion sensor heads, providing a choice in matching technology to application
  • a push-button timed Maintenance Mode that allows test and maintenance functions with no extra trouble reports to the system
  • a uniquely constructed chassis that prevents accumulation of condensate commonly generated by the severe temperature changes these devices are typically exposed to.

Installation Features


  • Patented cover latch offers the industry?s only no-tools single point cover assembly
  • Patented cover tether keeps cover at unit for convenience
  • Patented no-tools front or rear loading and removing sampling/exhaust tubes
  • All gaskets are permanently attached and per-installed


  • Patented no-tools terminal blocks for easier wiring with built-in test meter probe access
  • Intuitively labeled terminal positions
  • Dedicated and segregated terminal blocks for power input, FACU interface, relay control, remote accessories and detector interconnection
  • No confusing "special programming" required
  • Permanently attached wiring diagram on inside front cover
  • Two sets of 10A form "C" alarm contacts
  • One set of 10A form "C" trouble contacts
  • One set of 1A form "A" alarm contacts and one set of 7A form "B" trouble contacts for FACU interface Testing
  • Patented Maintenance Mode offers 3-minute interval for test and maintenance functions with no extra trouble reports to the system (auto shut-off upon cover latch engagement)
  • Patented Test Port allows for aerosol smoke testing without cover removal
  • Magnet test capability (magnet included)

Service Features

  • Standard interchangeable "twist-in" UL268 photoelectric or ionization heads for easy cleaning and replacement
  • Advanced detector head design yields internal dust filtering
  • Front no-tools sampling tube removal and replacement
  • provides for simple inspection of debris accumulation
  • Compatible with all legacy APC remotes, duct detectors and sample tubes

Performance Features

  • NEMA 4X watertight enclosure for non-hazardous indoor and outdoor applications, to include corrosive environments
  • Listed for air velocities between 100-4000 ft./min
  • Ion and Photo models listed for applications ranging from -4°F to 158°F (-20°C to 70°C)
5 Stars
Product shipped on time, product worked as described.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from valley cottage, ny. on 9/24/2014

Recently Viewed Items