- Provides two independent fuse circuits (per module)
- Circuits rated to a maximum of 10A @ 250VAC
- Protective fuse covers provided
- Simple wire jumpering on feed side allows use as a dual circuit power distribution module
- Compact PCB size allows for high density integration
- Provided fuse clips accept standard .25" X 1.25" buss type fuse(AG Series) (max. 10A @ 250VAC)
- Un-loaded fuse clips allow for custom application fusing of independent circuits- VAC and VDC at various currents up to 10A @ 250VAC max. (SL-100 Series)
- /S versions supplied with spacers for installation on standard back panels
- /T versions come complete with track and track mounting hardware which facilitates installation in standard cabinets
- /C versions mounted in dust resistant enclosures
- /C/R versions, enclosure mounted with red cover forNYC and other uses
The SC-100 Series Fuse Modules provide a safe and convenient way to protect control and load circuits from over-current conditions. These modules are properly configured for maximum rated limit of 10A @ 250VAC. The SC-100 Series comes completewith 10A @ 250VAC fuses pre-installed with a protective cover on the fuse.
Modules may be ‘snapped apart’ from a standard 4 module assembly and used independently. SC-100 Series modules provide two independent circuits per module position. By jumpering the individual fused circuits together on the power input side, these modules make an excellent power distribution solution for a centralized power source.
Part Number | Module Positions | Total Fuse Circuits | Track Mounted Dimensions | Enclosure Mounted Dimensions | Cover Material |
---|
SSU-SC-111/C | 1 | 2 | | 5.125" H 3.125" W 2.50" D | Grey ABS 94V-O Plastic |
---|
SSU-SC-111/C/R | Red ABS 94V-O Plastic |
---|
SSU-SC-111/T | 3.40" H 2.00" W 1.15" D | |
|
---|
SSU-SC-112/C | 2 | 4 | | 5.125" H 3.125" W 2.50" D | Grey ABS 94V-O Plastic |
---|
SSU-SC-112/C/R | Red ABS 94V-O Plastic |
---|
SSU-SC-112/T | 3.4" H 2.125" W 1.15" D | |
|
---|
SSU-SC-114/C | 4 | 8 | | 5.125" H 9.50" W 2.50" D | Plated 18 gauge CRS |
---|
SSU-SC-114/C/R | Red 18 gauge CRS |
---|
SSU-SC-114/T | 3.40" H 4.25" W 1.15" D | |
|
---|
SSU-SC-118/C | 8 | 16 | | 5.125" H 9.50" W 2.50" D | Plated 18 gauge CRS |
---|
SSU-SC-118/C/R | Red 18 gauge CRS |
---|
SSU-SC-118/T | 3.50" H 8.50 " W 1.15" D | |
|
---|
/T VERSIONS | 3.5" wide, low profile plastic snap track provided, with mounting screws |
---|
/C VERSIONS | Backbox: 18ga CRS, plated with 1/2" conduit knockouts top and bottom |
---|
/C/R VERSIONS | Red Backbox: 18ga CRS, plated with 1/2" conduit knockouts top and bottom |
---|
Power Capacity (per fuse circuit) | 0 to 250VAC/VDC @ 0 to 10A max. |
---|
Fuse Type | .25" x 1.25" buss type-3AG |
---|
Fuse Sizing | Refer to NEC (National Electric Code) for guidelines on sizing fuses to match application |
---|
Wiring | #12 to #22 AWG terminals |
---|
Environmental | 32°F to 120°F (0°C to 49°C) @ 93% RH Non-condensing |
---|
*UOXX (UL864) = Control Unit Accessories, System; 2=Component; 7=Certified for Canada
*UUKL (UL864) = Smoke Control System Equipment, System; 2=Component
*NMTR (UL508) = Miscellaneous Apparatus, System; 2=Component
*PAZX (UL916) = Energy Management Equipment, System; 2=Component
*UEHX (UL2017) = General Purpose Signaling Devices and Systems, System; 2=Component