System Sensor 2WTA-B P/E Smoke w/Heat and Sounder

System Sensor 2WTA-B P/E Smoke w/Heat and Sounder

Manufacturer:System Sensor
Manufacturer Part#:2WTA-B
Our Part#:BK-2WTAB
Stock Status: In Stock
Retail Price:$48.13
Your Savings:$3.33(7%)
Your Price:$44.80

Feature:

System Sensor

Feature:

2WTA-B

Feature:

Yes

Feature:

0783863019968

Feature 5

Yes

Feature 7

Product Type:Combination Detector|Input Voltage:24VDC|Detection Type:Photoelectric + Heat|Connection Type:System|Intended Use:Commercial/Industrial|Battery Backup:No|Interconnect:No|System Type:Conventional

Features

  • Full line of options including:
    – 85 dB sounder
    – Form C relay
    – Isolated thermal sensor
  • Maintains the i3 feature set including:
    – Plug-in design – base included
    – In-line terminals
    – Flexible mounting options
    – Stop-Drop ’N Lock™ attachmentto the base
    – Removable cover and chamber
    – Remote maintenance signaling
    – Drift compensation and smoothing algorithms
    – Simplified sensitivity measurement
    – Dual color LEDs

Installation ease.

Throughout the i3 series, installation is simple with its installer-friendly base and plug-in design. The base accommodates a broad range of back box and direct mounting options, and provides ample space for pre-wiring the installation. To complete the installation, the i3 detector plugs into its base with a simple Stop Drop ’N Lock action.

Intelligence.

To reduce the likelihood of nuisance alarms, all i3 detectors are equipped with both drift compensation and smoothing algorithms. These capabilities minimize both short- and long-term causes of nuisance alarms such as RF interference and dust accumulation. When connected to the 2W-MOD2 loop test /maintenance module or an i3 Ready™ panel, 2-wire i3 detectors can generate a remote maintenance signal when they are in a maintenance or freeze trouble condition. To measure the sensitivity of any i3 detector, the SENS-RDR displays the reading, in terms of percent per foot obscuration, within seconds.

Instant inspection.

The i3 line’s red and green LEDs simplify local status indication during power-up, standby, alarm, maintenance and freeze trouble conditions. When in alarm, i3 sounder models generate an 85dB temporal tone. If connected to the RRS-MOD reversing relay/synchronization module, all i3 sounders on the loop will activate when one detector is in alarm. Additionally, the RRS-MOD synchronizes the output of all i3 sounders, to ensure a clear audible signal.

Should the application call for differentiating between a local and a general alarm, the i3 line offers an isolated thermal model, which initiates a local alarm when smoke is detected, and a general alarm when the thermal sensor is activated.

The 2WTA-B is a 2-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.

You May Also Like...

 

Recently Viewed Items